We were extremely impressed with Brightspeed’s prices—you’ll be hard-pressed to find a better deal on gigabit fiber internet. While its fiber coverage area is growing, it currently remains very small. Plus, it's a brand-new provider so there are still a lot of unknowns.
Hawaiian Telcom packs a lot of value into its plans, but it may not be fast enough for large families who do a ton of streaming or uploading. Opt for a short contract if available because paying out half of a two- or three-year commitment here will hurt!
Starlink uses new low-orbit technology to deliver satellite internet to customers around the globe. The company got its start offering faster speeds and much lower latency than other satellite providers, but now offers download speeds comparable to those offered by other satellite providers. Starlink still offers decently low latency for satellite, but it can’t compete against fiber or cable internet providers.
Brightspeed is slowly building out a fiber network that offers a pretty great value at $65 per month for up to 940 Mbps. That’s just 7 cents per Mbps, which puts it right in line with top fiber providers like AT&T. Unfortunately, this fiber service is still not widely available.
Because Brightspeed’s fiber footprint is still fairly small, the vast majority of Brightspeed’s current service offerings are DSL. That means that you’re going to pay more money for less speed—it’s just the nature of the DSL beast.
The upshot is that Brightspeed’s DSL prices are actually pretty competitive, starting at $50 per month. With advertised speeds of up to 140 Mbps (but often lower, depending on where you live), that puts the provider at about 36 cents per Mbps. This, of course, falls far short of most cable and fiber providers.
Learn more about the differences between fiber and DSL internet.
Hawaiian Telcom internet provides a ton of value no matter which plan you buy, but some plans offer more value than others. If fiber is available in your area, you can get 940 Mbps for around 56% of the national benchmark price. (1) Lower speeds (those as low as 11 Mbps with a DSL connection) cost as little as a third of the national benchmark.
Hawaiian has its flaws. You may not have access to its fiber infrastructure (yet), even if it's installed in your neighborhood. We've heard of wait times of several months. Then, even its fiber speeds aren’t as fast as technology allows. If you try to end your contract early, you’ll pay for that—big time. You may also see hefty price hikes in year two—some of the biggest we've seen, in fact.
But when you consider the great service you’ll receive, low-cost equipment and installation, and a refreshing lack of hidden fees at checkout, Hawaiian Telcom gives you one more way to make your mainlander friends envy your island life.
Starlink offers a variety of internet plans in four main categories: Standard, Priority, Mobile, and Mobile Priority. Its Standard plan is decent for home internet if you don’t have any fiber or cable internet options, but it will cost $90–$120. The Mobile plan is intended for RVs and travelers. These standard plans aren’t subject to official data caps, which is a nice change! If you go with the mobile option, you can pause it month to month but your traffic will be deprioritized relative to home and priority users.
Starlink’s most expensive plans are now named Priority plans, and there’s one for fixed locations and one for use on the go. Both have data caps, and both require a spendy high-performance receiver. Both plans cost at least $250 per month, with increased rates if you need more high-speed data. That’s some of the most expensive prices we’ve seen for internet anywhere, so these plans are pretty hard to recommend for most households.
Satellite internet provider Viasat has plans that are priced similarly to Starlink's standard options, but with data caps and much higher latency. That means that, while you can get a Viasat plan of 100 Mbps in some places, your connection will still feel very slow because it takes so long for data to get to and from the high-orbit satellites. HughesNet, the other big satellite provider in the US, has pricing similar to Starlink's but strict data caps and download speeds that reach only 25 Mbps.
Even with its benefits compared to other satellite providers, Starlink earned a pretty low score on value because the service is much slower and more expensive than home internet from cable or fiber internet providers. It doesn’t compete very well against DSL or fixed wireless internet either, but it’s a decent option of last resort if you are a digital nomad or live in a rural area.
Impressive is definitely the right word to describe Brightspeed’s performance. The fiber service is excellent, with symmetrical speeds up to 940 Mbps. Symmetrical speed means the upload and download speeds are equal, which makes for much better overall performance compared to typical services where upload is significantly slower.
The DSL service is competitive with most other DSL providers, and seems to be fairly reliable—although we have heard some complaints of outages and interruptions. That said, it is DSL, so you’re only going to get limited speeds.
Our main concern with Brightspeed’s performance is simply how new the company is. It hasn’t had a chance to prove itself yet, and there may be growing pains as it builds out its fiber network. That said, we don’t expect many issues with DSL, since Brightspeed basically inherited the infrastructure directly from CenturyLink.
Hawaiian Telcom uses an infrastructure of fiber, cable, and DSL. About 215,000 homes and businesses have access to Hawaiian’s fiber network. (2) That accounts for about half of Hawaiian's infrastructure, (3) which is impressive for a small provider. The other half is mostly DSL mixed with a bit of cable, which don't perform as well. The good news is Hawaiian is replacing its legacy cable and DSL lines, so if you don’t have access to its fiber network yet, you probably will within a few years.
Starlink once offered download speeds that were much, much faster than what satellite competitors could offer, but the company changed its plans and pricing in May of 2023. Today, the service sells home internet with download speeds of 25–100 Mbps, upload speeds of 5–10 Mbps, and latency in the range of 25–50 ms. Those speeds look fast enough for gaming and video conferencing on paper, but third-party research from Ookla found that Starlink users are getting average download speeds of about 66 Mbps, upload speeds of nearly 8 Mbps, and latency of a 62 ms in the first quarter of 2023. That kind of service might be good enough for online shopping or even streaming one show in high definition, but you wouldn’t be able to make video calls, play some online games, or livestream your gameplay. (1)
That same study showed Starlink performed better on all speed metrics than competitors Viasat or HughesNet, but was worse than cable and fiber providers across the board. Unfortunately, Starlink speeds are slowing as the company adds new subscribers because of network congestion. The change in plan offerings is the best evidence of that, but it's not hopeless. The company has launched nearly 4,000 satellites and is planning new launches with updated V2 equipment it says will improve reliability and handle much more bandwidth. (2)
Brightspeed installation is relatively straightforward. The professional installation has a $99 fee attached, which is pretty standard, but self-installation is free. You’ll probably have to go for the pro install with a fiber plan, since you’ll need an optical network terminal (ONT) installed.
For DSL service, you have a choice of professional installation or self-installation, though you can only self-install DSL service if you already have a phone jack in your home. If you don’t, a technician will have to come out and add one.
The equipment is also straightforward. You get a basic wireless gateway (a combination modem and router) that’ll get you online and handle the speeds for your plan. There are none of the mesh systems and other fancy extras some providers offer, but it’ll do the job. Equipment rental will run you $15 per month, which is fairly standard.
That’s kind of the theme with Brightspeed’s equipment and installation process. There’s nothing bad or out of the ordinary, but there’s also nothing particularly interesting or exciting about it.
Hawaiian Telcom charges a moderate $9.99 to use its modem. You could use your own modem to save money, but you won’t be able to add Hawaiian’s Whole Home Wi-Fi or upgrade your service to Premier Value, Hawaiian’s tech plan. If you do go with Hawaiian’s modem, you can also rent between one and three Google Wi-Fi pods for just $7 per month total. Unless you live in a McMansion (more than 4,500 sq. ft.), you shouldn’t have any dead spots. Some of our top providers don't charge rental fees, and we would like to see Hawaiian Telcom follow suit, but we still love these low rates.
Both self-installation and professional installation are free, but you may need to cover a $34.99 activation fee (waived during some promotions). That’s steeper than most activation fees, but since professional installation usually costs $75 or more, you’ll still save a ton—and not have to worry about setting it up yourself. Plus, if you have a professional install your internet, they will repair any damaged wiring at no cost.
Unlike other satellite internet providers, Starlink does not require (or even offer) professional installation. Instead, you will be sent a Starlink Kit that contains all the hardware you need to install a Starlink dish yourself. Although the kit comes with a satellite dish and a base, you may want to purchase a mount to place the dish above ground level for a clearer view of the sky.
If you need internet while traveling, you'll need one of Starlink’s mobile plans. If you don’t need to use the receiver while you’re traveling faster than 10 miles per hour, you can stick with the basic $600 model. If you need internet while your RV or boat is moving, though, you’ll need one of the Mobile Priority plans and the required high-performance receiver.
To install Starlink, download the app on your phone and follow the instructions to find an unobstructed view and complete the setup. The do-it-yourself installation is designed to be straightforward, but it can take several hours. If technical issues arise, you can turn to Starlink customer support or an unofficial online community for help.
Unlike HughesNet and Viasat, Starlink doesn’t offer a leasing option for its equipment in the US, or require an activation fee. Instead, customers have to buy the basic Starlink Kit for a high upfront cost of $599. That averages to about $25 per month if you spread the cost over two years, which is more than you would pay for Viasat or HughesNet equipment. If you need the high-performance Starlink kit because of either extreme weather or your Priority service plan, setup starts at $2,500 before taxes.
If one area will make or break Brightspeed, it’s customer experience. The provider got its start by acquiring a large number of DSL markets from CenturyLink, so a lot of customers had their internet service transition from one provider to another. A sudden shift in customer experience here could have been really bad.
Opinions of the service are quite mixed so far. Some customers seem to be having a fine experience, with no noticeable change from how things were with CenturyLink. Others have had a rockier transition, with major complaints about speed and customer service.
These types of reports may give you pause, but since the provider is new and the transition from CenturyLink is still happening, things may improve.
We love that you can get started for around $35 and that the tech will automatically repair wiring if needed. But if you want additional technical support, you'll need for Hawaiian’s rather pricy Premier Value upgrade ($15.99 per month for two years). With it, a technician can help you with wire maintenance and Wi-Fi optimization, internet security for up to 10 devices, and priority for technician appointments. But we'd probably skip it at this price tag.
Unfortunately, many customers report problems with billing and customer service. If you go with Hawaiian, check your bill carefully and be prepared to sit on hold if you call in with issues.
Starlink’s customer support seems to be struggling to keep up with the needs of its growing customer base. Along with sometimes inconsistent speeds and connectivity issues, this is leading to mixed experiences with the service.
Elon Musk, CEO of Starlink, recently said delays were most common in highly populated areas, but rural areas are the best place for the service, anyway. (3) There have also been reports of long delays in receiving Starlink equipment due to the effects of the global chip shortage on production. (4) Some customers who pre-ordered Starlink kits have had to wait more than a year to receive them and received few updates from the company (5), but you can look up your address using this Starlink map to find out what to expect.
Other internet providers tend to offer more customer support options and be more reachable than Starlink. Starlink’s website offers a customer support FAQ section, but there is no public contact phone number or email address. To contact the company directly for assistance, you have to log in and send customer support a message. On the plus side, it is possible to find help elsewhere. Starlink has an enthusiastic community of users who post helpful videos on YouTube and answer questions on Reddit.