Hargray is a good buy for most families willing to commit to at least a year of service, but its steep setup costs and early termination fees mean canceling too soon will cost you big. Meanwhile, YouTube creators wanting high-performance fiber internet should move on.
MaxxSouth Broadband delivers fast, reliable cable and fiber internet to much of Mississippi and some of Alabama. The internet service provider (ISP) packs a ton of value in its plans, especially for smaller households. But if you want top-notch customer service, this might not be the company for you.
Mediacom offers a decent overall experience, with fast speeds and modern Wi-Fi gear. However, big rate hikes, a hefty installation cost, and lots of small fees bring the rating down.
Overall, Hargray offers a lot of speed for the price, and all plans come with unlimited data, which made us do happy dances. For the best deal (AKA the lowest price-to-speed ratio), stick with one of Hargray’s slowest plans—which are fast enough for most households anyway. This company’s 100 and 200 Mbps plans come in at just 45% of what most plans in the US cost, while its 1 Gig plans cost around 85% of the national benchmark (1).
Higher-speed plans also come with another downside: while Hargray boasts a fiber network, people who upload a lot of video will lament its slow (for fiber) upload speeds. In short, Hargray’s a great deal for most people, but if top performance is important to you, save your happy dance for another provider.
MaxxSouth offers plans ranging from 150 Mbps to an incredible 10 gigs. However, anything above 1 gig isn't yet widely available, and for good reason. Most households don't need near those speeds, and current devices can't use it anyway. So stick with MaxxSouth's 1 gig plans or lower. In fact, the slower your plan, the better the deal you get with MaxxSouth. A 150 Mbps plan costs just 28% of the national benchmark, while a 1 gig plan runs about 67% of the national benchmark (which is still a good deal). (1)
Plans come with unlimited data, decent upload speeds, and inexpensive equipment and installation—all with no contract. That’s a ton of value!
Rating Mediacom’s value requires a long-term mindset. When you first sign up, the prices are extremely low—possibly the best on the market. Some come in at just 20% of the national benchmark, if you opt for paperless billing and autopay (1). However, each year, your cost gradually increases until it reaches a “standard value” (usually after three years). These prices are less exciting: you’ll end up paying roughly double what you initially signed up for. Depending on the length of your contract term, you may be able to jump ship before the price gets too high, but this might be too much effort for some.
Now, to be fair, many internet service providers (ISPs) do this (with a few notable exceptions, like CenturyLink). Mediacom is also pretty transparent about these price hikes and when you can expect them. However, the low starting prices here make the increases feel worse than they are, and that’s not great.
Hargray uses a fiber optic network, which is much more reliable than satellite or fixed wireless (like 5G) internet. Fiber is also capable of faster speeds (up to 5 Gigs for both download and upload) than any other kind of internet.
Unfortunately, Hargray isn’t using its fiber network to its fullest extent. Its fastest speed is only 1 gig, which most cable internet companies offer. It’s kinda bumming us out, like a straight-B student who could totally ace the class if only they’d apply themselves more. But the real bummer is that Hargray gives you only 20–50 Mbps for uploading, which is great but nowhere close to the symmetrical ideal that fiber can deliver. While most people will love how quickly they can upload a file to Google Drive or post to their Insta account, we think it’s a tragic underutilization of fiber technology. We know. #FirstWorldProblems.
MaxxSouth Broadband offers cable and fiber internet plans, both of which are highly reliable. MaxxSouth’s cable plans range from 150 Mbps to 1 gig download speeds, with upload speeds from 5 Mbps to 15 Mbps, which is better than a lot of other providers.
Some MaxxSouth fiber plans boast a whopping 10 gigs (holy cannoli!) with symmetrical connections (meaning the upload speeds match the download speeds). However, it's more realistic to see actual speeds max out at around 1 gig, even if you buy a faster plan. With 10 gigs, you could host the mother of all LAN parties (can we join?) and still have mountains of leftover bandwidth.
We have no major complaints about Mediacom’s performance. There’s a range of plans available (up to 1 Gbps), so you can find something to suit whatever your needs are. We do have a couple of small gripes, though.
First, there are data caps on all internet plans, with no unlimited data option. The lowest-tier package has a cap of just 350 GB, which is pretty harsh, given the average person uses 536 GB per month (2). The middle-tier internet plans have 1.5 and 3 TB limits, and that's better—this should be plenty for most users and is in line with most other providers that have data caps.
The 1 Gbps plan bumps data caps up to 6 TB, which is effectively unlimited for most use cases, although a household streaming in 4K could theoretically max this one out, too. Going over the cap costs $10 per 50 GB, which, again, is in line with other providers charging overage fees.
Hargray’s equipment rental prices are super reasonable. You can rent a modem for just $4 per month, which makes the hassle of using your own gear a lot less appealing. Unless, of course, you’re a technophile who has a favorite modem (more power to you!). You can use most modems. Hargray’s Wi-Fi gear is also inexpensive, coming in at $10 per month. The price includes at least two extenders and free Wi-Fi setup to make sure your signal is dialed. That’s a sweet deal.
The rest of your internet installation will cost you, though. Professional installation costs around $100. Self-setup is technically free, but you have to cough up a $99 activation fee. The activation fee is refundable after your first year of service, but it still hurts, and you’ll probably forget you have a refund coming long before it hits your account anyway. Still, with self-setup, you’ll get to skip the dreaded installation appointment window, so it might still be worth it.
MaxxSouth has minimal equipment and installation costs. A router/modem combo is included in your plan’s pricing, which is a rare find indeed. If you have a large home or a big family, though, you probably want to spring for this provider’s eero TrueMesh Wi-Fi, which uses multiple signal extenders placed throughout your home for the best coverage. At a reasonable $15 per month, this Wi-Fi package also includes an app that helps you find and eliminate dead spots, set parental controls, and even gives you access to remote support.
MaxxSouth’s professional installation will cost you around $20 in most cases, though if your home isn’t quite internet ready, this cost could go up. Since professional installation usually costs $70–$100 even for plug-and-play homes, that’s a sweet deal. The downside is that there’s no free self-install option, which means you’ll have to schedule an appointment. But there are worse trade-offs.
Mediacom offers a home networking combo called Xtream WiFi360pro. It uses a cable modem and eero Pro 6 mesh routers to ensure coverage over your whole house. The cost is $10 per month for a pair of routers, and you can add additional units for $6 each if needed.
Installation is less exciting. A professional installation and an activation fee will cost you around $120 total, and there’s no option to do it yourself. The fees can sometimes be waived with certain promotions—we recommend shopping around for one or asking a sales rep because these are steep.
As an Amazon Associate, Switchful.com may earn commissions from qualifying purchases.
Hargray has two levels of customer service (2), and they’re both pretty solid. The first is what you’d expect: you pay full price for all technician visits ($65) and the cost of any repairs, troubleshooting, or installation of new wires and jacks. Other than the cost of work done, there’s no additional charge for this service level.
If connection issues make you nervous or you want Hargray’s highest level of service, you might want to spring for Hargray’s Connected Home Plan for about $6 per month. With that, you’re covered for repairs of common equipment, like wiring, jacks, and splitters—whether the damage was caused by you or an act of God. For services that aren’t fully covered (like learning how to use your Hargray modem or troubleshooting your own router) you pay just $35 per visit.
We love that installation is just $20 in most cases and that you can call into MaxxSouth customer service 24/7/365. However, some of the customer reviews suggest that the low price and availability aren’t all they’re cracked up to be. Multiple reviews cite technicians leaving holes in walls, unsightly cables, or non-functioning internet in their wake, while others say it’s hard to get a person on the phone when they call in.
MaxxSouth has some decent self-help content on its website to help you troubleshoot issues on your own, but not all issues can be solved this way. We’d love to see MaxxSouth’s customer service rise to the level of its value in other areas.
The Mediacom customer experience is decent overall. The provider scores a bit below average on customer satisfaction surveys like the American Customer Satisfaction Index (ACSI) (3), but overall, the service itself is fine. Speeds are solid and reliable, the Wi-Fi equipment is good, and the prices are competitive (at least initially).
Our biggest knock against Mediacom is the tremendous amount of small fees the company hits you with. In addition to the equipment and installation fees already mentioned, the company charges one-time fees for activation, early termination of your contract, and “Wi-Fi certification” (whatever that means). There’s a fee every time you have a technician come out for service. All these fees add up and can really sour the experience over time.